- whatsapp +51955515985
- support@ecuforcetruck.com
- 24/7 Customer Support
Menu
Shop
Account
Subtotal: $0.00
No products in the cart.
Circuit Description
This fault code checks for system errors in the aftertreatment fuel injection system. This diagnostic can detect malfunctions of the aftertreatment fuel shutoff valve.
Before active regeneration of the aftertreatment diesel particulate filter, a diagnostic test on the system is performed. The aftertreatment fuel injector opens and relieves fuel pressure in the line. The aftertreatment fuel pressure sensor must be reading atmospheric pressure at this point in the test. The aftertreatment fuel injector closes and the aftertreatment purge air actuator opens. This pressurizes the aftertreatment fuel system to vehicle air pressure. The diagnostic then checks to make sure the aftertreatment fuel pressure sensor is reading vehicle air pressure. The aftertreatment fuel shutoff valve then opens and allows pressurized fuel to enter the system. The aftertreatment fuel injector then opens and primes the system by purging the air from the line. The aftertreatment fuel shutoff valve and aftertreatment fuel injector then close and trap the fuel between the aftertreatment fuel shutoff valve and the aftertreatment fuel injector. The diagnostic checks to make sure the system maintains fuel pressure.
Component Location
The aftertreatment fuel injector is installed in the exhaust system in the turbocharger adapter pipe. The aftertreatment fuel pressure sensor and aftertreatment fuel shutoff valve are installed in the shutoff valve manifold. The aftertreatment purge air actuator is located above the shutoff valve manifold.
Conditions for Running the Diagnostics
This diagnostic runs during active regeneration of the aftertreatment diesel particulate filter.
Conditions for Setting the Fault Codes
The engine control module (ECM) detected an internally leaking aftertreatment fuel shutoff valve, aftertreatment purge air actuator, or a stuck closed aftertreatment fuel injector.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or the malfunction indicator lamp (MIL) immediately when the diagnostic runs and fails.
Active regeneration of the aftertreatment diesel particulate filter will be disabled until the next key cycle.
Engine torque will be reduced if the engine is operated for an extended period of time with this fault active.
Conditions for Clearing the Fault Code
To validate the repair, perform INSITE? electronic service tool Aftertreatment Diesel Particulate Filter Regeneration Test. Once the temperatures in the aftertreatment are warm enough to inject diesel fuel into the exhaust, the diagnostic will run.
The fault code status displayed by INSITE? electronic service tool will change to INACTIVE immediately after the diagnostic runs and passes.
The ECM will turn off the amber CHECK ENGINE lamp after the diagnostic runs and passes.
For On-Board Diagnostics (OBD) engines, the ECM will turn off the MIL after three consecutive trips where the diagnostic runs and passes.
The ?Reset All Faults? command in INSITE? electronic service tool can be used to clear active and inactive faults, as well as extinguish the MIL for OBD applications
Shop Talk
Possible causes of this fault code include:
Internal leak of the aftertreatment fuel shutoff valve allowing fuel pressure to leak past the shutoff valve.
Possible Cause:
1) Aftertreatment fuel Pressure Sensor failure
2) Aftertreatment Injector
3) ECM calibration
Related
Categories Cumminz, DTC TRUCKS, ISX15 CM2250 (2010-12)Tags 1-, 1925, 2, 2010-12, 334, 3482, Aftertreatment, CM2250, Code, Cummins, Data, Erratic, Fault, FMI, Fuel, Incorrect, Intermittent, ISX15, or, PID, Shutoff, SID, SPN, Valve
Wiring Diagrams
Component Locators
- VOLVO PROSIS 2023 ( 11.2022 )
Trucks software$96.00
Rated 0 out of 5
- Isuzu G IDSS 2020 Diagnostic Service System [08.2020] Release Full
ISUZU$125.00
Rated 0 out of 5
CAT$50.00
Rated 0 out of 5
- Cumming Caltem 5.9.1 2022 ( 1 PC )
cummisznn$78.00
Rated 0 out of 5
- Meritor Wabco Tool Box 12.9.1
Trucks software$35.00
Rated 0 out of 5
- Freightliner ServiceLink 4.9.6
Freightliner$30.00
Rated 0 out of 5
- Hino Diagnostic eXplorer 2 – Hino DX2 v1.1.21.4 with keygen unlocked ( Hino trucks )
Hino$60.00
Rated 0 out of 5
- download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software
Hitachi$76.00
Rated 0 out of 5
- 10 IN 1 FOR CAT SIS Caterpillar 2021 Full Service Dealer INCLUDING CAT 2019 C
CAT$110.00
Rated 0 out of 5
- Diagnostic Software for Navistar Diamond Logic Builder 2023 (DLB)
Navistar$94.00
Rated 0 out of 5
- Volvo I-Shift service manual PDF
TRUCK MANUALS$55.00
Rated 0 out of 5
John Deere$120.00
Rated 0 out of 5
- CAT Password Recovery Tool for CAT ecm configuration files WINDOWS 10
CAT$20.00
Rated 0 out of 5
- Detroit Diesel Switcher Tool + Video Manual
Detroit$12.00
Rated 0 out of 5
- Detroit Diesel Diagnostic Link DDDL 8.0 PRO PROFESSIONAL Software trucks
Detroit$25.00
Rated 0 out of 5
NISSAN UD$100.00
Rated 0 out of 5
- International Truck ISIS – Oncommand Service Information Q4.2020 [04.2020]
Navistar$85.00
Rated 0 out of 5
- premium volvo tech tool update 2.8.150 diagnostic software 1pc
Trucks software$150.00
Rated 0 out of 5
- CAT SIS caterpillar 2021 Full Service Dealer
CAT$90.00
Rated 0 out of 5
- Perkins EST 2021B v1.0 Active License + FPKG ( 1 PC )
CAT$75.00
Rated 0 out of 5
Related products
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- SERVICE MANUAL DAF Workshop Manual DD DF DT Series
DAF$20.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROTRON 230-260
DEUTZ$30.00
Rated 0 out of 5
- SERVICE MANUAL Carrie 40 and 50 X
CARRIE$20.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2006
HINO$34.00
Rated 0 out of 5
- SERVICE MANUAL DETROIT DD_PLATFORM_WIRING
DETROIT$60.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2004
HINO$37.00
Rated 0 out of 5
- SERVICE MANUAL MACK MP7 2007
MACK$30.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2019
HINO$40.00
Rated 0 out of 5
- SERVICE MANUAL EATON CEMT (18 Speed) TRSM0011
EATON$25.00
Rated 0 out of 5
- SERVICE MANUAL DDEC VI Troubleshooting Guide – MBE4000 6SE568
DETROIT$40.00
Rated 0 out of 5